Applied Biochemists Home Page
Applied Biochemists

Resources
Product Info
Product Sources
Plant Identification
 

Plant Identification  --  Submerged  --  Common Naiad

COMMON NAIAD (Najas flexilis)


Treatment Tips: Plants often grow in thick clumps or beds. Good coverage and dispersion of chemical is required to achieve control. Inject chemical if growth is in deep water.


Description: Leaves tapered to fine point with minute spines on margin.


Distribution: This species is common and widespread.
Recommended Control Method: For areas less than 1 acre, tank mix 1 part Cutrine-Plus to 5 parts Weedtrine-D. Apply at the rate of 0.9 gallons per 1/5 surface acre.*
OR
For areas in excess of 1 acre, tank mix 1 part Cutrine-Plus to 1 part Reward. Apply at the rate of 1.5 gallons per surface acre.
**Dilute to facilitate even distribution.
Maintenance Control Method: Add Aquashade at the rate of 1 quart per acre-foot of water to prevent initial growth or to retard regrowth of plants after chemical treatment.
Alternate Control Methods: Aquathol K liquid: 1.0 to 1.9 gallons per acre-foot.
Clearigate: 4.4 to 8.7 gallons per acre-foot.
Reward: 1 to 2 gallons per surface acre.
Fluridone: Various liquid or pelletized formulations(see label).

 

 

 

Descriptions and pictures are from the book "How to Identify and Control Water Weeds and Algae", Edited by James C. Schmidt, 5th edition revised 1998, copyright 1976 Applied Biochemists.

 

  a division of Advantis Technologies Inc. Home About Us News Contact Us